全自動恒溫膏體灌裝機

適合粘度較大，流動性較差的膏體物料的計量灌裝。采用氣動灌裝，料斗和料缸、出料管道均用電加熱，料斗配有一框式攪拌系統。清洗、操作方便，符合GMP標準。

特點

1、本機配圓柱形料箱，夾層電加溫，有劃槳攪拌裝置，可對膏液體物料加熱、攪拌、溫控等功能，可以讓需要加熱、攪拌、恒溫的物料在規定的范圍內灌裝，達到預定的效果 ；
2、本機灌裝采用壓縮空氣控制，雙頭雙線，光標定位剎車形式，速度比擋瓶形式明顯提高；

3、氣動部分采用臺灣AirTac的氣動元件；

4、物料接觸部分采用316L不銹鋼制成，符合GMP要求；

5、有灌裝量調節手柄，灌裝速度可任意調節，灌裝精確度高；

6、灌裝悶頭采用防滴漏、防拉絲及升降灌裝裝置。

7、物料從料斗到灌裝嘴出料端采用發熱絲保溫；

8、機器底部裝腳裝、移動方便
9、本機設計合理，結構緊湊，操作簡單易用，故障率低。

技術參數：

1、灌裝范圍：5-150（ml）(可按照用戶要求定做）

2、料斗容量：30，40，50（L）

3、料斗材質：與物料接觸面（內層）316L不銹鋼，夾層為SUS304不銹鋼

3、生產能力：0-25（次/分）

4、使用溫度：0-95℃

5、驅動壓力：0.2-0.45（mpa）

6、攪拌系統10-60轉

7、攪拌功率：60w

8、外形尺寸（約）：550×400×1900

Single head automatic thermostat paste filling machine
Suitable viscosity, less liquid metering paste filling material.Pneumatic filling, hopper and tank, electric discharge pipes are heated hopper with a box-type mixing system.Cleaning, easy to operate, meet the GMP standard.
Feature
Within the range of 1, the machine is equipped with a cylindrical tank, electric heating mezzanine with paddle stirring device, the material can be heated to a liquid paste, stirring, temperature control and other functions, can make need to be heated, stirring, temperature of the material in the prescribedfilling, to achieve the desired effect;
2, the machine uses compressed air to control the filling, double double, cursor positioning brake form faster than the bottle in the form of block significantly improved;
3, the pneumatic part adopts Taiwan AirTac pneumatic components;
4, material contact parts made of 316L stainless steel, meet the GMP requirements;
5, there are adjustment handle of filling volume, the filling speed can be adjusted, filling accuracy;
6 Filling head adopts anti-leakage, anti-pull and lifting filling device.
7, the material from the hopper to the filling nozzle discharge end uses heating wire insulation;
8, bottom mounted machine foot wear, easy to move
9, the machine reasonable design, compact structure, simple-to-use, low failure rate.
Technical parameters:
1, Filling range :5-150 (ml) (can be customized according to user requirements)
2, Hopper capacity: 30,40,50 (L)
3, Hopper Material: The material contact surface (inner) 316L stainless steel, laminated to SUS304 stainless steel
4, the production capacity :0-25 (beats / min)
5, temperature :0-95 ℃
6, the driving pressure :0.2-0 .45 (mpa)
7, 10-60 rpm mixing system
8, the stirring power: 60w
9, Dimensions (approximately): 550 × 400 × 1900